1H0953227    91461830312   3 pin flasher relay

99361510100  99361510101  for vehicles without controllable wiper intervals

F9T-SSR-993  99361522701 99361522702  Replace you old failure-prone mechanical DME relay with this premium Solid-State upgrade. Because it has no moving parts, it cannot "wear out" like the original or aftermarket relays do. 

Please follow these installation instructions;

1. Keep the relay in the anti-static bag.
2. Remove the original relay from the Central Electrics plate.
3. Touch the body of your Porsche, preferably exposed metal.
4. Remove the Solid-State Relay from the anti-static bag
    a. Avoid touching the pins if at all possible
    b. Maintain physical contact with your Porsche if at all possible.
5. Install the Solid-State Relay

F9T-SSR-993-PP-D  99361522701 99361522702  Replace you old failure-prone mechanical DME relay with this premium Solid-State upgrade. Because it has no moving parts, it cannot "wear out" like the original or aftermarket relays do. The Pump-Prime feature automatically runs the fuel pump for up to 3 seconds when the ignition is switched to the "On" position. This builds optimum fuel pressure before cranking the engine, insuring your Porsche starts as fast and as smooth as it possibly can. 

This optional feature allows you to instantly know the state of the DME Relay. It features four LEDs that are directly connected to the critical inputs and outputs of the relay. All four LEDs must be illuminated for the engine to start and run. If one or more LED(s) are off , there is an issue with the corresponding circuit. Not for 1996-98 993.

Ignition SW – (Yellow) Input signal to power up fuel injection system and enable fuel pump control.
Fuel Inj. Power – (Red) Output indicating the fuel injection system is powered up.
Ctl. Fuel Pump – (Green) Input signal indicating the DME has commanded the fuel pump on.
Fuel Pump – (Blue) Output indicating the fuel pump is powered up.

F9T-SSR-993  99361522701 99361522702  Replace you old failure-prone mechanical DME relay with this premium Solid-State upgrade. Because it has no moving parts, it cannot "wear out" like the original or aftermarket relays do. This optional feature allows you to instantly know the state of the DME Relay. It features four LEDs that are directly connected to the critical inputs and outputs of the relay. All four LEDs must be illuminated for the engine to start and run. If one or more LED(s) are off , there is an issue with the corresponding circuit.

Ignition SW – (Yellow) Input signal to power up fuel injection system and enable fuel pump control.
Fuel Inj. Power – (Red) Output indicating the fuel injection system is powered up.
Ctl. Fuel Pump – (Green) Input signal indicating the DME has commanded the fuel pump on.
Fuel Pump – (Blue) Output indicating the fuel pump is powered up.

94461511202  94461511203

811951253  PCG95125400 for all 964 & 993. OEM part

99361811100  99661811300  1397328015