93060213400  No longer available from Porsche.

91160210201  for all 911 from 1972 on, 964 & 993. Price per seal, 2 required on 964 & 993

00004320252 Ventilation Kit includes: - Distributor ventilation connection (A) - Rubber Grommet (B) - White Grommet connector (C) - Hose (D) HOW TO FIT: Firstly prise of the oval plate arrowed on the distributor with a screwdriver. Then remove the large black air guide pipe as we need to drill a hole in it at the green dot. The pipe removes by loosening jubilee clips at top and bottom. You will also need to remove two sensor connectors on the pipe. I also removed the two sensors near the distributor so that I had easy access to the plate. Drill at 18mm hole in the pipe, 40mm to the right of the tail light ventilation nipple. Deburr the hole and remove all shavings. Install the rubber grommet (B) into the hole and install the white connector (C) into the grommet.Install the distributor connector (A) into the hole in the distributor where the plate was. Finally refit the air pipe and connect back up all the sensors. Install the hose (D) onto the new distributor and air pipe nipples and route

93060201501 930602015AX Bosch complete twin distributor rebuilt by Bosch, complete with 2 caps and 2 rotors, not for tubos. This unit is sold on an exchange basis, there is a core charge of £200 (core charge D) required to be added on this part, please add it to your shopping basket, it will be refunded on receipt of your old unit.

99960296403  7 part repair kit for all twin distributors found on 964 and 993

Distributor repair kit contains:
3 x German made bearings
1 x Distributor timing belt
1 x Pin for distributor pinion
1 x German made lower bearing
1 x Distributor seal (not shown)